VoipInnovations 404 err, no route found
Identifying details anonymized. Dialing muliple 10 digit North American numbers. I don’t think it’s the PBX since nothing was changed on it as far as I know. Previous SIP messages look like normal...
View ArticleClik here to view.
VOIP Innovations Cloud Network
Good Morning Colleagues I hope you are doing fine . I was checked Firewall ==> Networks and i have found the below entries that i didn’t as a local zone . Does my system is hacked ? Best Regards 7...
View ArticleClik here to view.
Sipstation Connectivity Check Fails
When performing the Connectivity Check in the SIPstation module I get the following result: IPs for external are configured correctly. Port forwarding for SIPstation is configured correctly. Equipment...
View ArticleSIPstation External Connectivity check is timing out
This is a new installation with the 20-day trial. The Check Connectivity is showing the Firewall Status as Fail and pops up a banner message: The test timed out which means your firewall is probably...
View ArticleVI Module configuration or just setup IP configuration
We are moving back to VoIP Innovations. Was going to use the FreePBX VI module for configurating VI endpoints mapped to FreePBX instances. Using the module means all DIDs have to have inbound CNAM. We...
View ArticleSipstation
I bought two sip trunks in Sipstation, but wish to disable registration and allow traffic from a set of IPs. I added the second IP in the Sipstation store, but it allows traffic only from Free-PBX,...
View ArticleSipStation configuration
I’ve just moved my FreePBX server to a new network with a new static IP address and am unable to get it to accept calls. I’ve double checked my firewall and I can’t find anything wrong with the port...
View ArticleSMS forwarding or failing over?
I had a text end up at my cell phone yesterday morning which is set at Voip Innovations as the failover for that particular DID. I dont see anything in the asterisk log or in UCP and VI support swears...
View ArticleIncoming Sipstation sms issue
I’m setting up freepbx with the sipstation sms service using UCP as an interface Initially I was able to receive text messages into the ucp, however that stopped, and I’ve been trying to figure out if...
View ArticleSIPStation support...now at 65 minutes on hold
Trunks are down. Started at #2 in the SIPStation support queue and after 65 minutes am at #1. This has to work better…I’m at risk of getting to the 2:00 PM Pacific Time close of business with...
View ArticleClik here to view.
All Circuits are Busy Now SIPStation
Hello, I have gotten my sip station trial but when I make an outbound call I get the error All circuits are busy now. In the trunk I do see this error: However I have routes like SIPStation-Out and...
View ArticleUnable to receive texts
On Friday, we were able to receive texts for MFA reasons but since Saturday we are unable to receive any texts but can send them. These are the updates that auto updated on Saturday morning (manager...
View ArticleNo inbound SMS
Using latest stable version of voipinnovations module and latest stable version of asterisk 18. Outbound SMS works but no inbound. I allowed all in on firewall to makes sure that is not blocking....
View ArticleClik here to view.
SIPStation Down?
Does anyone use SIPStation and, if so, is it up for them? I’m trying to get around a faxing issue with our main PBX by using FreePBX for HR to be able to receive faxes at. However, inbound calling...
View ArticleHangUp CAUSE
Hello… We have a FREEPBX 15 (15.0.37.5). hosting an DID INTL for MEX (through VoipInnovations) we are experiencing some issues while assigning call to extension, as in a random behavior, we have got :...
View ArticleClik here to view.
Unable to receive calls
I’ve been testing out SIPStation with FreePBX 16, and I’ve been able to make calls but not receive them. Phone tries to connect and then disconnects. Nothing even appears on the SIPStation account....
View ArticleMultiple SMS recipients
Is there any way to send out a text to multiple recipients using SIPStation? Is there a was to send an automated SMS through a script? 1 post - 1 participant Read full topic
View ArticleClik here to view.
VoIP Innovations module metered trunk gives whoops
I set up the VoIP Innovations module using their provided key, which automatically created trunks for me. However, I’m facing an issue: when I try to edit these auto-generated trunks under PJSIP, I...
View ArticleMetered SIP Trunking all Trunks rejected-Voip Innovations
Today all Freepbx Platforms (20) had all of the trunks listed in Metered SIP Trunking module flagged as rejected. The trunks are provided by Voip Innovations. Not sure if the problem came from VI or...
View ArticleIncoming Caller ID only Numbers
I am setting up my first FreePBX system, so I am new to all this, but everything I read shows SIPStation should be forwarding Caller ID name headers. Debugging with sngrep, I am only seeing the phone...
View ArticleIs there a way to test a FAXStation/SIPStation?
We we cleaning up our storage/inventory areas and found a FAXStation. Is there a way to test it to make sure it works? It powers on. I can’t find it in the list of the ones we have active. I don’t...
View ArticleInbound DID Call from Second SIP Trunk Failing
I currently have a FreePBX server in our main office that’s been running without issue for the last 5-years. The original setup successfully utilizes a handful of DID numbers without issue. Yesterday...
View ArticleSms web hook example to manage outgoing SMS messages via SIPStation
Hi, Does anyone have an example script that intercepts and updates outbound SMS messages via SIPStation? I’m currently using the SMS Web Hook to catch incoming messages and send them via email to the...
View ArticleSMS options with Voice Innovations
I have a freepbx with SIP trunks using Voice innovations not using sip station my dids have SMS enabled on them however when I send sms to dids I get a call not a message I see the error in my logs...
View ArticleClik here to view.
Easy-Button Modules for Sangoma SIP Trunking
Getting started with outbound and inbound calling with the PSTN ? Try the easy-button modules for FreePBX to get Tango up and hopping on the phone : PBX GUI - SIPStation PBX GUI - Voip Innovations...
View Article