4th Trunk not working
@AaronGustafson wrote: I have 4 trunks from SIPStation on my FreePBX install and the fourth trunk is not working. I even went so far as to do a complete reinstall (Needed to clean it up anyways). When...
View ArticleFast Busy on Some Calls
@gprimr1 wrote: I've been using SIPStation for a couple months now with a lot of success. Lately some members (we are a fire house) have reported getting 3 rings then a fast busy when making calls. I...
View ArticleSIPStation not providing CID (CNAM) Info
@andmore wrote: We just switched our VOIP line to SIPStation and ever since we made the switch we are no longer getting the CID (CNAME) information. With my old provider I could see the information...
View ArticleClik here to view.
New trunk added to sip station, not showing in FreePBX Statistics Dashboard
@TX_RX wrote: I just added an additional trunk to my Sip Station Account, when I added the third one I expected to see the dashboard update to show the new trunk, however it did not. I have confirmed...
View ArticleError creating trunk
@Dunmarie wrote: I have just download the latest version of FreePBX Distro. Version FreePBX 13.0.70Installation went without any issues.However when trying to setup a new Trunk, I get the following...
View ArticleProblem getting Sip port binding
@rdesilva wrote: Hi I am new to FreePBX (8). We are currently running an older version of the application and I am trying to create a new server with FreePBX 13 and Asterisk 13. When we try to connect...
View ArticleOutbound caller id?
@freak wrote: How do I control the outbound caller id? When I place a call it shows "unavailable". I tried on the trunk and route but nothing seems to change it. Posts: 1 Participants: 1 Read full topic
View Article[SOLVED] Please point me in the right direction. I just purchased a...
@pramirez wrote: So far I have set up my IP phone with a static IP address and I have created an extension. I can login to my ip phone, freePBX local server, and my SIPstation account. When I call my...
View ArticleChannel.c:4860 ast_prod: Prodding channel 'SIP/192.168.3.9-00000511' failed
@thecooldude wrote: I just switched our ISDN PRI line from Avaya G430 to Asterisk with Digium T133 and getting the following error. [2015-01-25 12:22:29] WARNING[17313][C-000004c6]: channel.c:4860...
View ArticleUnable to dial via Telkom trunk
@Mathabathe wrote: I have changed the outbound routes to use the Telkom (POTS)(DAHDI/g0) on freepbx and not g1 (voip)(DAHDI/g1) however when I dial it is still using voip . Posts: 3 Participants: 3...
View ArticleSipstation + freepbx: what is the message if my server is down?
@chattel wrote: New admin here. I have deployed a Freepbx system using 1 trunk from Sipstation. We can make outbound calls as well as receive inbound calls. Works as expected. My boss asked me...
View ArticleClik here to view.
Elastix: Incoming callers hear ringing and staff cant hear anything
@bobby_inline wrote: New installation of an Elastix phone system and randomly, at least once a day - and on different extensions - incoming callers are hearing a ringing on their end. The ringing is...
View ArticleSB6850 And SIPStation Trunks
@GSnover wrote: A friend is using SIPStation trunks behind a Motorola Surfboard (SB6850) cable modem - if we enable the SIP ALG inbound works perfectly, but outbound fails with an authentication...
View ArticleSIPStation with warm spare
@sonny wrote: I have two Freepbx 12 setup. Primary PBX is setup with SIPStation and I have setup warm spare PBX in different state. My warm spare backs up and restores daily, disables trunks and...
View ArticleTaxes and Fees on Sipstation
@uncleaelfrich wrote: Looking at my telephone bill and current hosted VOIP bill, the federal, state, and local taxes and fees run about 30% of the monthly billed amount. I live in Los Angeles, CA.)...
View ArticleSIP trunk routing incorrectly
@draccusfly wrote: I have a strange issue whereby an incoming international SIP trunk seems to be changing the incoming number from the SIP number to a landline number on the PBX, as a result it is...
View ArticleSIP Hacking
@mike_b wrote: The other day I tried to call and got an "All channels busy" message. When I checked the FreePBX dashboard, I saw that between 50 an 80 channels were busy. I called my SIP provider, and...
View ArticleChange CallerID on SIPSTATION trunk
@avayax wrote: Is it possible to change the outgoing CallerID on my SIPSTATION trunk?I am using SIPstation for outbound and another service for inbound, where my main company number is, which I would...
View ArticleForward if busy on incoming call on SIPStation trunk
@avayax wrote: Is there a feature where I can configure a forward if busy number on SIPStation trunks? Let's say I receive an incoming call and all my trunks are busy, the call would forward to an...
View ArticleClik here to view.
Unable to get incoming calls through SIP trunks. Getting error SIP/2.0 401...
@agasasterisk wrote: Hi Experts, I am unable get incoming calls from another phone system which does not register with USername or passwords. The Asterisk system is able to make outgoing calls to the...
View Article