VoIP Innovations and SIPStation and MMS
SIP Station and VoIP innovations are both supposed to support SMS. But do they both support MMS? Is it supported in Zulu and SangomaConnect for both trunking providers? Mobile as well as desktop? I...
View ArticleIncomming call audio
I have setup a freePBX system with trial SIPSTATION. I am able to call in, but the caller never hears any audio. I can see a configured phone the incoming call, and can see the call in the logs. The...
View ArticleRead & Send SMS Message from Command Line (CLI)
Installed FreePBX 16 with SIPSTATION. I have confirmed that one of my extensions can send and received SMS messages through the UCP, however I am looking to automate the SMS process. Does anyone know...
View ArticleQuestions about Failover numbers, ddos service interruptions with sipstation...
We have a landline at our business that we would like to use as a failover number to our sipstation trunking. We have a physical pbxacct device here at our facility. We understand that calls will be...
View ArticleClik here to view.
Sipstation Module timeout
Just started happening for no reason: PBX Version:14.0.16.11 PBX Distro: 12.7.8-2107-3.sng7 Asterisk Version: 13.38.3 PHP Version 5.6.40 Is this something I can fix in php.ini? 1 post - 1 participant...
View ArticleAll circuits are busy now
/var/log/asterisk/full output below: [2022-02-14 05:50:27] VERBOSE[17611] netsock2.c: Using SIP RTP Audio TOS bits 184 [2022-02-14 05:50:27] VERBOSE[17611] netsock2.c: Using SIP RTP Audio TOS bits 184...
View ArticleSend multiple SMS/MMS with sangoma connect and Voip Innovations
I have SMS/MMS setup with the Sangoma Connect Module and using Voip Innovations trunks…and it is working. Does anyone know if there is a way to send a broadcast or have multiple recipients for an SMS...
View ArticleVerified Caller ID [V] only showing Number and not Actual Name
I have some calls coming in showing the [V] on the caller Id name but it is not showing the actual name of the person calling in, but only [V] and the calling number as the name. I know this is cause...
View ArticleVoip Innovations Module
I have installed the Voip Innovations Module and the Registration Status are all green. But when I go to the ROUTING tab it will NOT allow me to enable the Primary Gateway. Both Routes I have are...
View ArticleWhat can be done or not done with SIPStation free trial?
I’m new to freepbx user. Our company setup a FreePBX 15.0.23 box with a SIPStation free trial. The registration with the server and ip phone (Grandstream GPX1628) were successful. Calling to the the...
View ArticleSend SMS through SIPSTATION gateway from Asterisk AMI
I posted this in asterisk’s forums but was told this was something I should post here I’ve been testing some POC code and system architecture I’ve designed to make responding to SMS received from...
View ArticleNew install with SIP STATION
Hello, I’m setting up a new install. Using FreePBX 16.0.21.8 And I’m in the trial of SIP STATION (first time I use it). I went though the setup and everything is fine except that when I receive a...
View ArticleProblems with SIPSTATIO TRIAL
I am trying to get a SIPSTATION Trial, but when I go to step 2 I get a red stripe at the top. It keeps loading and doesn’t give me the next step. 1 post - 1 participant Read full topic
View ArticleStir/Shaken and SipStation
Is SipStation signing their calls? Or are there steps customers of SipStation need to take in order for their calls to be signed? 14 posts - 4 participants Read full topic
View ArticleCan't receive SMS Sipstation
I have Sipstation as my provider and freepbx setup. I am able to send sms from the UCP but I cannot receive. Has anyone ever had this issue? 2 posts - 2 participants Read full topic
View ArticleSatus SIP registration Sangoma FreePBX_ SIP chanel
Hello Guys , I am trying to get a SIP trunk register on Sangoma FreePBX , in Advanced Setting , under SIP channel driver, i disabled PJSIP and left only SIP channel enable. Having Elastix with SIP...
View ArticleOutgoing calls going not ringing on certain End Users (comcast)
So just seeing if anyone has run into this… We put new Resident Call Boxes (Mircom) in a high rise client. These boxes take standard copper phone line only when NOT using their in house VOIP solution…...
View ArticleAny luck configuring Sangoma Talk to send SMS with the Metered Sip Trunking...
Hey All, I am having trouble getting any SMS sent. I get an error in the Sangoma Talk app that says “The message could not be sent. Please try again.” and in the sangomaconnect_err.log I get a line...
View ArticleAfter activating SIPStation endpoint is adding +1
Hey everyone, I have everything configured on my FreePBX, and I am just about to push this into production. I was using the SIPStation trial - the trial trunks are different from the production...
View ArticleClik here to view.
Whatever happened to Sipstation Premium / HD calling?
I was having a discussion about HD voice codecs and it just reminded me that Sipstation once had a trial of hd codec support SIPStation Premium Free Beta Testing Sangoma Trunking Today we are happy to...
View Article